Vstřikování, za pomoci vody, termoplastů a termoplastových dílů (plastů)

Upřesnit výběr:
Zpět
Hledaný výraz : Česká republika
Stáhnout databázi
189 Firmy
See premium products
Naši klienti
Vstřikování, za pomoci vody, termoplastů (plastů)
Česká republika
Naši přední klienti

GUMOTEX, akciová společnost

Široké portfolio produktů nachází své uplatnění v automobilovém průmyslu, odvětví vysoce sofistikovaných, vzduchem plněných systémů ...

Břeclav - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 519 314 111

JELÍNEK - TRADING spol. s r.o.

Recyklace plastů, výroba regranulátů kompaundů Vstřikování plastů, výroba kompostérů Výroba a prodej přepravních a kontrolních ...

Zlín - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 577 590 910

INKOS Rokycany, s.r.o.

Lisování plastů, vstřikování plastů, střihání textilií pro automobilový průmysl, stěhování strojů a linek na klíč, mechanické práce

Rokycany - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 371 725 496

EUROPLAST CZ s.r.o.

Výroba a vstřikování termoplastů, prodej a distribuce: - plastové záslepky, dorovnávací šrouby, ovládací a distanční elementy - rozsah...

Lanškroun - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 465 320 269

NATURA HRADEC s.r.o.

Výroba: - vstřikování termoplastů dle specifikace zákazníka do 400g - plasty pro průmyslové použití - plasty pro elektrotechnický ...

Hradec králové - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 495 428 260

ITW PRONOVIA, s.r.o.

Výroba automobilových komponent: - vstřikované plastické výrobky - kovové lisované a tvářené díly (lisování za studena) - montáž a ...

Velká bíteš - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 566 788 811

TUCKER s.r.o.

Výroba plastových výrobků pro automobilový průmysl.

Rovensko pod troskami - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 493 546 522

LINDEN s.r.o.

Výroba plastových komponentů s povrchovou úpravou, výroba větších i menších sérií, výroba náhradních dílů a montáž, montáže, ...

Hustopeče u brna - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 515 151 818

PLASTON CR, s.r.o.

Výroba výrobků z plastů, přístroje na osvěžení vzduchu

Šluknov - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 412 314 411

Kovoplast Chlumec nad Cidlinou, a.s.

Vývoj, výroba a dodávky: - zpětná zrcátka, držáky zpětných zrcátek pro nákladní automobily a autobusy Výroba, prodej, opravy: - ...

Chlumec nad cidlinou - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 495 484 543

MAPLAST CZ, s.r.o.

Poskytování komplexních služeb v oblasti výroby plastů: - konstrukce a výroba forem na vstřikování plastů - vstřikování termoplastů - ...

Blučina - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 547 235 623

INTEPLAST CZ s.r.o.

Výroba a montáž plastových výlisků. Specializace na technické plasty, ozubená kola, zalisování kovových inzertů (1K a 2K technologie)....

Klášterec nad ohří - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 352 539 711

MEGATECH Industries Jablonec s.r.o.

Výroba výrobků z plastů pro automobilový průmysl Výroba reflexních ploch (odrazky) a dílů pro silniční vozidla a vodící sloupky ...

Jablonec nad nisou - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 483 336 111

Alfa Plastik, a.s.

Alfa Plastik, a.s. je podnik s více než šedesátiletou tradicí v plastikářském průmyslu. Nabízíme vývoj, výrobu a montáž plastových ...

Bruntál - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 554 720 111

LPM s.r.o.

Konstrukce a výroba lisovacích forem. Vstřikování termoplastů a duroplastů (reaktoplasty): - technické díly pro elektrotechnický a ...

Jičín - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 493 546 011

Jiří Řebíček - Metalplast, s.r.o.

Výroba: - vstřikování pryžových (gumových) směsí EPDM - vstřikování termoplastů (uzavírací síla do 600 tun, hmotnost výlisků do 1500g)...

Polička - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 461 724 254

Gerresheimer Horsovsky Tyn spol. s r.o.

- konstrukce a výroba: vstřikovací formy - montáž plastových dílů - vstřikování plastů

Horšovský týn - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 373 726 111

LUNA PLAST, a.s.

Výroba polyethylénového potrubí pro hlavní vedení a rozvody studené vody, plynu a odkanalizování a pro kabelové průchodky a chráničky....

Mělník - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 315 626 322

KOVAP Náchod, s.r.o.

Vývoj, návrh, výroba a prodej: - plechové mechanické hračky a hry včetně mechanického pohonu - plechové a kovové modely aut atd. - ...

Nový hrádek - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 491 478 224

Tachovské SPV s.r.o.

Vstřikování plastů včetně výroby forem: výrobky pro potravinářský průmysl: víčka na sudy odlamovací i pevná, víčka na 3,4,5 l lahve ...

Tachov - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 374 721 255

KARTÁČOVNY spol. s r.o.

Výroba a prodej kartáčnické zboží jako jsou košťata, košťata na podlahu, košťata na úklid, úklidová košťata, klasická košťata, smetáky...

Červená voda - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 465 626 331

VS PLASTIK, s.r.o.

Výroba plastových výrobků na vstřikovacích lisech, výroba elektroinstalačního materiálu. Zpracované materiály ABS, PP, PE, PS, PA, PC,...

Vsetín - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 571 405 573

Presplast, s.r.o.

Vstřikování termoplastů (uzavírací síla 600-6500kN): - technické výlisky z plastů (vstřikování termoplastů, dodávky just-in-time, ...

Česká třebová - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 465 507 111

SÁRY s.r.o.

Vstřikování technických součástí z konstrukčních plastů (PA, ABS, PC, POM, PS, PP, PE) na moderních vstřikovacích lisech vybavených ...

Neratovice - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 315 682 315

BELD, s.r.o.

Lisování plastových hmot formou tlakového vstřikování plastů: - příslušenství pro cyklistiku (kryty řetězů, zvonky, balanční kolečka, ...

Šumperk - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 583 216 153

CH - PLAST spol. s r.o.

Vstřikování plastů

Jaroměřice nad rokytnou - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 568 440 770

ELIS-PLAST, spol. s r.o.

- vstřikování - běžné díly pro spotřební a elektrotechnický průmysl s maximální velikostí výlisku do 300 g. - vakuové tváření - běžné ...

Chrást u plzně - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 377 945 253

Mürdter Dvořák, lisovna, spol. s r.o.

Výroba plastových dílů pro automobilový průmysl. Jednokomponentní vstřikované plastové díly pro automobilový průmysl, spotřební ...

Olšany u prostějova - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 582 402 418

HOLPLAST, s.r.o.

Výroba přístrojových svorkovnic, vstřikování plastů, montáž elektrotechnických součástek - přístrojové svorkovnice KL - keramické ...

Prostějov - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 582 345 110

KASPER KOVO s.r.o., provozovna AQUA-STEEL

Vyrábíme a dodáváme výrobky a zařízení pro úpravu průmyslových vod a pitné vody včetně bazénové, rozvody pitné vody, rozvody užitkové ...

Trutnov - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 499 852 111

GEALAN Czech, s.r.o.

Zpracování plastů, výroba plastových profilů, technické plastové výlisky

Aš - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 354 525 998

HRADIL Lisování plastů

Výroba výrobků a výlisků z plastů pro výrobu plastových, hliníkových a EURO oken, automobilový průmysl

Želechovice nad dřevnicí - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 577 902 470

RS PLAST Strachoň s.r.o.

Naše společnost vyrábí vlastní typizované plastové vyrovnávací podložky a plastové distanční podložky rozměr 70x70mm, tloušťka 5mm a ...

Svitavy - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 461 616 737

DEVILLE TPC Jihlava s.r.o., DTPCJ

Výroba přesných výlisků z plastických hmot (lisování, tváření) pro automobilový průmysl, spotřební elektroniku.

Jihlava - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 567 570 616

NOVÝ ELTON a.s.

Zakázková strojírenská výroba: - soustružené díly v oblasti jemné a přesné mechaniky - CNC obráběné díly Nástrojárna, výroba: - ...

Nové město nad metují - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 491 403 133

Moulds and Tools - Technic s.r.o.

Výroba, opracování: - hliníkové formy na plasty (prototypové a malosériové) - prototypové formy pro automobilový průmysl - prototypové...

Valašské meziříčí - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 571 667 705

H & P plast, spol. s r.o.

Výroba vstřikování termoplastů: - zpracování plastových hmot - technologií vstřikování do 350g, uzavírací síla 160 t - přepravka na ...

Bystré u poličky - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 461 741 413

Chemoplast BEC, a.s.

VÝROBA PLASTOVÝCH VÝROBKŮ: - výroba a zpracování plastů dle norem ISO 9001, TS 16949, ISO 14001 - technické výlisky z plastů - přesné ...

Blansko - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 515 554 206

A.RAYMOND JABLONEC s.r.o.

Speciální upínací prvky z umělé hmoty a kovů dle požadavků zákazníka, tj. držáky kabelů, hadic a trubek, příchytky vnitřního obložení ...

Jablonec nad nisou - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 483 358 111

PLASTVALM s.r.o.

Výroba forem a nástrojů na plasty Lisování výrobků z plastů do hmotnosti 150 g Vstřikování plastů, lisování termoplastů - lisování ...

Valašské meziříčí - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 571 613 436

Promens a.s.

Výrobce technických plastových dílů podle dodaného výkresu především pro automobilový průmysl a strojírenství RIM - reaktivní ...

Zlín - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 577 051 111

Leibfarth Europlastic s.r.o.

Vstřikování termoplastů, zásobníky (tonery) pro kopírovací zařízení

Bor u tachova - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 374 713 141

Plastoma výrobní družstvo

Zakázkový výrobce plastových dílců s hmotností maximálně téměř 400 gramů, výrobu realizuje na jedenácti vstřikovacích strojích. Pro ...

Železnice - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 602 255 535

NIMAPLAST

Vstřikování termoplastů a technických výlisků včetně jejich následné kompletace. Výroba plastových výlisků pro automobilový průmysl (...

Žďár nad sázavou - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 736 626 070

PeHToo a.s.

Komponenty vyráběné vstřikováním plastů do 6000g pro různá odvětví včetně autoprůmyslu, vstřikovací formy, montáže

Horšovský týn - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 379 417 116

PETER - GFK spol. s r.o.

Výroba dílů z vyztužených plastů pro automobilový průmysl

Kocbeře - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 499 623 565

KDK Automotive Czech s.r.o.

Výroba plastových dílů pro automobilový průmysl

Tachov - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 374 507 733

OKULA Nýrsko a.s.

Vstřikování plastů, lisování plastů, lakování plastů včetně potisku a montáže. Plastové výrobky pro automobilový, elektrotechnický, ...

Nýrsko - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 376 359 381

KOH-I-NOOR HARDTMUTH a.s.

Výroba a prodej: 1) školní a kancelářské potřeby: - grafitové, pastelové, speciální tuhy, křídy, uhly, voskovky, vodové a temperové ...

České budějovice - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 389 000 200

LENA - hračky, s.r.o.

Výroba plastových hraček, vstřikování termoplastů Distribuce kompletního sortimentu hraček do celého světa: auta, autodráhy, odrážela ...

Dolní benešov - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 597 582 421

MAZETA spol. s r.o.

Nástrojářské práce, výroba: - lisovací formy na plasty - nástroje, přípravky, nářadí a měřidla - měřidla Kovoobrábění (soustružení, ...

Mořkov - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 556 705 919

INOTECH ČR, spol. s r.o.

Lakování plastů (piano black - duo cure UV lak), vstřikování plastů 1k a 2k technologie, Insert Moulding - obstřikování vložených dílů...

Tachov - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 374 219 911

PF PLASTY CZ s.r.o.

Služby: Konstrukce a výroba vstřikovacích forem Výroba vstřiků z plastů, vstřikování plastů, výlisky pro automobilový průmysl Výroba: ...

Chuchelná - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 553 750 265

Husqvarna Manufacturing CZ s.r.o.

Vývoj, výroba a prodej: - formy pro vstřikování plastů (až do hmotnosti 15 tun a maximální velikosti rámu 800x1200mm) včetně ...

Vrbno pod pradědem - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 554 790 111

KADEN - VODOMĚRY, s.r.o.

Vývoj, výroba, prodej, export, opravy a servis: - vodoměry Autorizované metrologické středisko. Vstřikování termoplastů: - technické ...

Skuhrov nad bělou - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 724 226 951

GAMA GROUP a.s.

GAMA GROUP a.s. podniká v oboru tváření plastů s hlavním zaměřením na vývoj a výrobu jednorázových zdravotních, laboratorních a ...

České budějovice - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 389 000 200

KUNSTSTOFF-FRÖHLICH Czech Plast s.r.o.

Rodinný podnik s více než 50letou zkušeností se zpracováním plastů, výrobou nástrojů a přípravků. Specialista v oblasti nádržek a ...

Písek - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 382 201 053

Metal Plast Produkt, s.r.o.

Výroba technických výlisků z plastů na vstřikovacích lisech ENGEL a BATTENFELD.

Březí u mikulova - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 519 521 240

Plasty Němec

Vstřikování a vyfukování plastů

Kyjov - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 608 815 603

Havel - plasty, s.r.o.

Vstřikování termoplastů od 1-2.000 g, uzavírací síla do 600 tun: - technické výlisky pro elektrotechnický, automobilový průmysl atd. -...

Polička - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 461 721 247

LUKOV Plast spol. s r.o.

Vstřikování termoplastů a montáž dílů pro automobilový a nábytkářský průmysl

Český dub - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 485 147 081

LORETA s.r.o.

Lisování a vstřikování termoplastů, specializace na technicky náročné výrobky s hmotností do 350 gramů. - technické výlisky do 300g ...

Jičín - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 493 594 127

MART v.o.s.

Výrobky z plastů vyráběné technologií vstřikováním na lisech do hmotnosti výlisku 1 kg s uzavírací silou do 400 tun - plastové ...

Svojšice - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 466 972 610

Mergon Czech s.r.o.

Výroba: formy pro automobilový průmysl a zdravotnictví, vyfukované plastové obaly, vyfukované technické výlisky, nádržky a systémy pro...

Modřice - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 547 101 711

Termoplast, s.r.o.

Lisovna - vstřikování plastů, návrhy a výroba: formy pro plasty

Nová bystřice - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 384 386 750

SAND Profile s.r.o.

Výroba plastových dílů pro průmysl.

Nový bor - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 487 716 105

FORMIKA, s.r.o.

Vývoj dílů a forem, zajištění výroby lisovacích forem a vstřikování dílů, montáž a kompletace sestav a funkčních celků. - výroba ...

Dolní němčí - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 572 693 571

Müller-Technik CZ s.r.o.

Výroba technicky náročných vstřikovacích výrobků z plastických hmot do 1 100g na zakázku pro automobilový průmysl

Lány - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 312 511 056

EuWe Eugen Wexler ČR, s.r.o.

Výroba plastových dílů pro automobilový průmysl

Rokycany - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 371 733 311

LISOVÁNÍ PLASTŮ

Zpracování termoplastů - vstřikování plastů do 300g: - technické výlisky - krabičky na šperky - obaly a sáčky - stuhy a ozdoby

Hlučín - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 608 712 423

Flídr plast s.r.o.

Vstřikování termoplastů a eleastomerů včetně všech druhů zálisků, maximální váha výlistků do 1.000 g Výroba tvarově a rozměrově ...

Polička - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 461 550 930

" K. T. Z., spol. s r.o. "

Zpracování plastů, výroba výrobků z plastů na vstřikovacích lisech: - potravinářská víčka a kelímky - drobné plastové výrobky pro ...

Kunžak - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 384 399 192

MetalPlast Lipník n. B. a.s.

- výroba kufrového a galanterního kování - výroba tvarovaných i rovinných částí čalounění a dílů pro automobilový průmysl - plastové ...

Lipník nad bečvou - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 581 726 111

Teknia Uhersky Brod, a.s.

Výroba přesných technických výlisků z plastů pro automobilový průmysl a elektrotechnický průmysl, lakování, ultrazvukové svařování, ...

Uherský brod - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 572 610 611

ACTI PACK CZ, a.s.

ACTI PACK CZ, a.s. se zabývá výrobou vyfukovaných plastových obalových prostředků pro balení kosmetických, farmaceutických, ...

Janovice nad úhlavou - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 376 361 417

A + S, s.r.o.

Vstřikování plastů Prodej PHM

Vlkoš u kyjova - Česká republika
Tel. číslo
Zavolejte této firmě

* This phone number available for 3 min is not the recipient’s number but a number from a service which will put you through to that person. This service is produced by Kompass.  Why this number ?

Service & free calls*

* This number, only available 3 minutes, is not your correspondant’s number but the number of a service putting you through to that person. This service is produced by Kompass.  Why this number ?

All the lines are busy at the moment, please try again in a moment.

+420 518 625 314
Zpět nahoru
Přehled českých firem z oboru vstřikování, za pomoci vody, termoplastů a termoplastových dílů (plastů)

Nabídněte nebo poptejte volnou kapacitu vstřikování, za pomoci vody, termoplastů a termoplastových dílů (plastů).

Kompass propojuje více než 5 mil. firem ze 70 zemí. Vyzkoušejte Kompass zdarma!

HLEDÁM NOVÉ ZÁKAZNÍKY|HLEDÁM NOVÉ DODAVATELE

Vašemu zadání odpovídají další obory a regiony